Greenfuturz

You know that the right RFID solution can help you keep track of the people and products that matter most to you – and save valuable time and money in the process – but only if the technology can capture data quickly, accurately and cost-efectively enough to keep up with your business. The faster your business moves, the more your business-critical applications will demand from an RFID reader. And these days, no one is slowing down their pace of business. RFID begins with the radio. So that’s where Zebra began with the FX7500 Fixed RFID Reader. We created a new RFID radio technology, purposely designed from the ground up for faster, more accurate read rates, and more consistent performance even in challenging environments. This software-based radio technology efectively future-proofs your RFID investment by delivering lexibility to implement future upgrades and improvements with minimal investment. Then we paired that radio with a new, more lexible Linux-based network architecture that integrates the tools and open-standard interfaces you need for fast, easy deployment with your RFID and back-end applications. The result is a ixed RFID reader that sets a new performance standard – delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point. It works better. It costs less.

All-new high performance radio technology: Higher sensitivity, improved interference rejection and echo cancellation means you get the best-in-class dense reader mode performance, up to 1200+ tags/sec in FM0 mode.

Integrated Power Over Ethernet (POE), optically isolated GPIO, USB Client and Host ports with Wi-Fi and Blue- tooth connectivity: All the tools you need for fast, easy deployment and simpliied ongoing management of your RFID applications are built right into the FX7500 architecture.

2-port and 4-port reader configuration: More coniguration options mean more lexibility to optimize your read ield. Deploy precisely the number of read points you need for proper coverage, no more, no less, and reduce your TCO.

Plenum Area Rated: The FX7500 is approved and suitable for environmental air handling space installation, so it can operate efectively within walls and ceilings.

Support for worldwide standards (FCC, ETSI EN 302 208) in either 4-port and 2-port mono-static antenna configurations EPC standards-based defined reader management Auto-discovery Flexible firmware upgrade features: Seamlessly integrates with existing IT environments; enables remote and centralized management; simpliies and reduces the cost of setup, deployment, testing and management.

Next generation reader platform, including dense reader mode suppor: Best-in-class read rates deliver superior read performance.

Linux: 512 MB Flash/256 MB RAM: Integration of a wide range of third-party applications for fast application deployment; supports upgrading to meet future requirements.

Owing to the presence of our expert team members, we have been able to offer a wide range of AN440 RFID UHF Dual Antenna.

Need to keep track of thousands of assets? High product density and heavy traffic across a large area? Get the capacity and range you demand for reliable RFID tag reading with the AN440 high-performance RFID area antenna. A good-looking, rugged general-purpose area antenna, the AN440 is designed to perform exceptionally in all environments, indoors and out. The AN440 RFID Antenna gives you a wide read field and high-speed RF signal conversion, so data capture is fast and accurate, even in expansive, high-demand environments. The AN440 is easy to mount on ceilings and walls, and its rugged white housing is at home in both customer-facing and industrial settings . So you can achieve superior read zones around stockroom shelves, warehouse doorways and dock platforms – anywhere boxes and pallets are moving into and out of your facility.

The rectangular AN440 antenna is designed to deliver faster, more accurate communication of EPC-compliant passive tag data to your RFID readers. So even in RF-challenging environments, you get longer read ranges and higher levels of performance. Your workflow keeps flowing, your inventory count stays accurate and your productivity can reach new heights. In addition, its dual-element architecture makes the AN440 suitable for bi-static operation. Or it can be used as two separate mono-static antennas in a single package. Deployment with Zebra fixed RFID readers is fast and easy, as the AN440 meets all standard technical requirements for any RFID implementation. So you can get your large-area application off the drawing board and into your production environment, quickly and efficiently.

No matter what help you might need, we have you covered. Our full suite of services offers‘ from the manufacturer’ expertise throughout the entire lifecycle of your RFID solution — from assessment, commissioning and rollout to ongoing training and day-to-day support. Our RFID Advanced Services provide the assistance you need to architect your solution for your business, processes and environment, ensuring that your pilot or full-scale rollout is designed to deliver peak performance — and maximum benefits. And post deployment, Zebra’s Support Services provide the everyday support you need to keep your RFID solution up and running day in and day out, with service programs that include 24x7 on-site coverage and preventive maintenance visits

Features:

• Best quality
• Attractive design
• Light weight
• Dual-element, ideal for bi-static operation 
• Can be used as two separate mono-static antennas in one package 
• Rugged design suitable for industrial applications

Application:

• Ceilings and walls to create superior read zones around shelves
• Doorways and chokepoints where boxes and pallets are moving through
• Portals, outdoor gates and conveyors
• RF-challenging environments

Greenfuturz is the Leading Manufacturer & Supplier of customized RFID Antennas and LM200 RFID UHF Antenna is one among them.

The Wide Frequency Range (865 MHz – 867 MHz) of LM200 gives you Maximum throughput & Accurate Results for UHF RFID Applications.

It’s Unique Design provides you Accurate Item Counts even in Highly-Congested environments which contains more number of RFID Tags. It is suitable for both Indoor & Outdoor RFID Application.

Zebra's family of Radio Frequency Identification (RFID) Antennas offers the versatility and performance required to meet diverse environmental and application needs — including customer-facing areas, warehouses and outdoor environments. When used in conjunction with Zebra's Fixed RFID Readers, communication with Electronic Product Code (EPC™)-compliant RFID tags is accurate, fast and efficient. Vital components in reader-tag communications, our family of efficient, high-performance antennas can meet the needs of any RFID solution.

RFID Antennas complement the portfolio of Zebra enterprise mobility solutions that enable organizations to capture, move and manage critical information to and from every point of business activity. In combination with Zebra's fixed readers, these efficient antennas deliver high-throughput, high capacity communication of EPC-compliant RFID tag data.

To help you seamlessly and successfully integrate your RFID Antennas into your environment, Zebra offers a complete suite of services that span the entire solution lifecycle — from initial planning and assessment through ongoing training and support.

Zebra's complete family of RFID antennas meets the needs of virtually any RFID application. Choose the antenna that is designed for your environment — carpeted, industrial or outdoors, delivers the right level of performance, meets mounting requirements and fits in your budget.

The AN480 single port antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The AN480 can be installed throughout the enterprise in manufacturing and warehouse floor environments, or any dock door receiving application. As with all Zebra antennas, the AN480 uses Zebra's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Zebra antenna with the AN480 is fast and easy.

Features:

• Excellent wide frequency band antenna response covering 865 Mhz ~ 956 Mhz , ideally suited for global deployments Available in right and left hand polarization.

Application:

• Ceilings and walls to create superior read zones around shelves 
• Doorways and chokepoints where boxes and pallets are moving through Portals, outdoor gates and conveyors 
• Indoor and outdoor applications

To achieve maximum visibility and efficiency in your most rugged environments, your operation needs an RFID reader that can keep up with the high volume and wide variety of pallets, cases and tagged items that go in, out and through your warehouse and dock doors each day.

The Zebra FX9600 Fixed UHF RFID Reader delivers the performance and features you need to handle it all. With support for Power over Ethernet, IP53 sealing and up to eight RF ports, the FX9600 brings a new level of cost efficiency to passive UHF asset tracking and inventory management, without compromising on performance. Industry-leading read rates, long read ranges and exceptional RF sensitivity ensure you can automate inventory management — from receiving and putaway to picking and shipping — without errors and without bottlenecks. The result? Increased efficiency and accuracy every time your inventory is touched, reduced labor costs and the delivery of the right product to the right customer, on time, every time. When you need industry-best RFID performance, the FX9600 delivers.

Now, get the performance and features you need to handle it all with the FX9600 — without breaking the bank. With industry-leading read rates, exceptional read accuracy and superior RF sensitivity, the FX9600 has what it takes to automate nearly every aspect of your inventory management — from receiving and putaway to picking and shipping — without errors or bottlenecks. The FX9600 is the industry-best performance your operation needs at a price you can afford.

Top-of-the-line Performance: When it comes to performance, the FX9600 delivers the best. The exceptionally high RF sensitivity delivers the greatest accuracy and longer read ranges, even in dense RF environments with challenging materials. And with the most power in its class, you can support the highest throughput, as well as all of your sophisticated software applications.

Unrivalled Deployment Simplicity-Host embedded applications directly on the FX9600, reducing deployment time, cost and complexity. With support for PoE and PoE+, there’s no need to run power drops to each reader — and with PoE+ or a 24V power supply, even long cable runs won’t reduce available RF power.

The Industry's Best Tco-Designed for tough environments, the rugged FX9600 can handle it all — damp dusty work areas, extreme heat and subzero temperatures. And with the eight-port model, you can cover more dock doors and portals with fewer readers, significantly lowering your investment, deployment and management costs.

With support for Wi-Fi dongles, you can wirelessly connect your FX9600 RFID readers to your existing Wi-Fi access point — no hard-wired connections required. And with support for Bluetooth dongles, you can connect virtually any Bluetooth-enabled host computer or handheld directly to the FX9600, increasing flexibility, processing speed and application performance.

Greenfuturz is the Leading Manufacturer & Supplier of customized RFID Antennas and LM700 RFID UHF Slim Antenna  is a Specialized Light Weight Antenna designed to be used as “Overhead-Mountable”.

“Slim & Sleek Design, Extremely Powerful & Space Saving RFID UHF Antenna – Perfect for Almost Any Environment”

It is thoughtfully designed in Global Frequency Band – 865-868 MHz, hence it can be used for almost all the RFID Applications & Achieve the Most Accurate Read Results.

It is well-suited for the following RFID Applications:

• RFID Smart Shelf
• POS(Point-of-Sales) System Applications
• Smart Displays
• Conveyor Belt Applications
• RFID Retail Stores
• RFID Warehouse Management System
• RFID Vehicle Parking Management

 

As per the needs and requirements of our clients, we are involved in providing RFID UHF Bluetooth Reader.

Other details:

• RFID UHF Handheld Reader – Android
• RFD8500 Series

Functions:

• RFD8500 Series Easily add high-performance UHF RFID and bar code
• Multi-OS and Multi-Platform
• Fixable connectivity options: Bluetooth® or Batch Mode
• Flexible deployment options
• Fast RFID tag capture in various environments
• High performance battery for full shift operation
• Fast and easy application development with Zebra’s unique ZETI protocol
• Easily toggle between RFID and bar code scanning
• Instantly capture any printed or electronic 1D/2D bar code

Other information:

Multi-OS and Multi-Platform:

• Leverage your mobile computing strategy and add world-class data collection capability in an economical way.
• Provides the peace of mind that the investment you make today will serve your business needs tomorrow.

Fast RFID Tag Capture In Various Environments:

• With Auto Mac* and our patent-pending breakthrough antenna design, you get maximum read/write speeds and coverage required to maximize workforce efficiency

High Performance Battery For Full Shift Operation:

• Our unique power-optimizing algorithm delivers the superior battery cycle times that ensure full-shift power, even with intensive usage

Flexible connectivity options:

Bluetooth® or Batch Mode Enable a real-time wireless connection to your mobile or backend systems via Bluetooth 2.1 or later. If a wireless connection is not available, batch mode enables the collection of up to 500 bar codes and/or 40,000 RFID tags. Just sync to upload the data from the RFD8500 to the host device at any time

Flexible deployment options:

Permanently attach to a compatible mobile device to create a dedicated inventory management device, temporarily attach to enable RFID when and where you need it on the mobile device of your choice, bringing comfort to inventory management tasks, deploy as separate devices — workers can put the host mobile computer in a pocket or on a desk to protect the device and create a lighter RFID solution

Prevent counterfeiting and protect consumer privacy with EPC Global Gen2 v2:

• Protect profitability, customer safety and privacy with some of the latest RFID features. Cryptographic tag authentication provides extensive protection against tag cloning, allowing you to deploy non closable tags to prevent counterfeit product from entering your supply chain. In addition, the RFD8500 allows businesses to protect a consumer’s post-sales privacy, for instance, by hiding data until a tag is interrogated by the RFD8500 with an untraceable privilege — when a purchased product is returned for a refund or exchange

Easy To Deploy: Attach And Remove In
Seconds Standard Quad Lock Mounts And Custom-Tailored Adapters:

• Just twist to lock onto or remove the RFD8500 from any Zebra or third party mobile computer via a Quad Lock or slide-on/slide-off Zebra custom tailored adaptor

RFID UHF Toll Gate Reader is specially designed & Manufactured by Greenfuturz for Highway Toll Plazas.

RFID UHF Antenna for Highway Tolls Achieve Lightning-Fast and Amazingly-Accurate Read Range of RFID-Tagged Vehicles

This is a carefully developed Antenna designed Dedicatedly to solve the Clashes and Chaos that you experience in the Highway Toll Plazas each & every day!